Brochure | Adlår Castra
Brochure
Brochure: NExt STEPS
1. Free advice
Following a review of our brochure, we can answer any questions you might have.
2. Performance and fixed quote questionnaire
The next best step is to get a personalised performance and fixed quote result. This helps us establish very early if a heat pump is right for your specific circumstances and guides the next steps.
3. Understanding your fixed quote and performance report
- We’ll send you your full report in an email.
- We’ll reach out to you to discuss the report, and give you advice on whether a heat pump is right for you.
4. Site Survey
Our report provides a very accurate initial estimate, but we must conduct a detailed surveyors survey of your property to check the details.
Our onsite survey includes:
- MCS 031: Room by room heat loss survey
- MIS 3005-D: Heat pump location design
- EU 813/2013: Noise assessment db(A)
- MGD 007: Installation assessment
FAST INSTALLATIONS WITH ADLår:
Our heat pumps start from £2,355, or £2,950 including the installation and MCS grant. We pride ourselves on being competitively priced compared to the market. We provide a detailed initial quote, but for more complex, larger homes, or, for example, you’re looking to upgrade to underfloor heating the costs can increase.
Fill in our quick form for a personalised cost estimate.
The payback period and return on your heat pump investment depends on which heat pump you have, the gas consumption you would have if you didn’t have a heat pump and the energy costs. Once you have all this mapped out, you can do a calculation on this. Adlår’s quick savings questionnaire can give you a good idea of your homes specific situation.
The Regulatory Assistance Project (RAP) suggests that if designed and installed well a heat pump can be cheaper than a gas boiler by up to 27%.
Using a rough demostration from People Powered Retrofit’s home assessment tool, it’s possible to see the potential of a low, medium and high impact retrofit, and the size of heat pump that could then be used i.e. small, medium and large.
- Baseline scenario: Peak heat load = 11.1kW (large heat pump required)
- Scenario 1 low impact retrofit: Peak heat load = 8.8kW (medium heat pump)
- Scenario 2 medium impact retrofit: Peak heat load = 5.1kW (small heat pump)
- Scenario 3 high impact retrofit: Peak heat load = 3.8kW (small heat pump)
What can be seen here is that any kind of retrofit reduces the size of the heat pump required – but a deep retrofit has a significant impact.
- We check your eligibility
- We do a detailed site survey under MCS guidelines
- We apply for your MCS BUS Scheme for you
- We certify and get you your £5,000
See more information on our Knowledge Hub page.